|
Do it yourself
| |||
| ||||
How to replace the rear lamp of the Renault Clio
Model: Renault Clio
MK 3, Clio 3, Clio III
- Years 2005-2013
In this video we can see how to replace the rear headlight bulb of the Renault Clio III: first, we need to remove the screws holding the support plate of the optical group. The youtuber, to remove it from its housing, has devised an intelligent system: he passes a strap through the narrowest part and then pulls. In this way, the headlight comes off without damaging anything. We remove the electrical connector and then pry on the clips holding the bulbs inside the optical group. The bulb group comes off all together and we can replace the burned out bulbs and check the socket seals. Remember to never touch the bulb of the new bulbs with bare hands, as this will drastically reduce their lifespan. We can reattach the connector, insert the bulb group into the headlight, and put everything back in place. Reattach the support plate and the job is done.
Posted on 14 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
When the lamp that illuminates the display of the clock in the center of the Renault Clio dashboard burns out, we must replace it. Equipped with a pl…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
To replace the rear light bulb on a Renault Clio 4, open the tailgate and locate the lining on the inside of the boot that allows access to the light…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
The protagonist of the video available here says that there is nothing difficult in carrying out the work mentioned. We follow the replacement proced…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.181
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |