Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to replace the rear headlight bulb of Renault Clio 2.

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Rear light bulb
Operation: How to replace the rear headlight bulb of Renault Clio 2.

In the following guide, we will describe the various steps required to replace the rear headlight bulb of your Renault Clio Mk2 on your own and in the correct way. The entire procedure takes only a few minutes and if you follow our instructions carefully, you will not encounter any difficulties. First, make sure you have turned off your Renault Clio 2 and go to the rear of the car. Lift the hood and locate the safety hook on the side. Unscrew it completely and then pull the entire headlight towards you. Finally, all that remains is to replace the faulty bulb with the new one.


Posted on 15 April 2023 by ScegliAuto



How do you replace the rear headlight bulb of the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) The replacement of the rear headlight bulb on the Renault Clio is done by opening the rear tailgate so that the knob inside the trunk, located near t
How do you replace the rear headlight bulb of the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the rear headlight bulb of the Renault Clio 4 is done by opening the rear hatch, so that the screws securing the headlight inside
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight

    Frequently Asked Questions

    • Clio 2005-2013 - What is the fuse for the reverse lights on the Renault Clio 3? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos