Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tail light bulb

To replace the rear light bulb on a Renault Clio 4, open the tailgate and locate the lining on the inside of the boot that allows access to the light unit. After removing the cover and unscrewing the fixings of the lamp, carefully extract the light unit from the bodywork. At the back, disconnect the electrical connector and remove the bulb holder, then take out the bulb to be replaced and install a replacement of the same type. Next, reposition the bulb holder, reconnect the connector, and return the lamp to its place, tightening the fixings correctly. Finally, close the tailgate and check the operation of the rear lights.

Posted on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Renault Clio 3?
How to Replace the Rear Light Bulb on the Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the rear light bulb on the Renault Clio 3, open the tailgate of the boot and loosen the screws found between the seal and the light. This …
How to Replace the Bulb of the Rear Light on a Renault Clio
How to Replace the Bulb of the Rear Light on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the bulb of the rear light on a Renault Clio, open the tailgate to access the knob inside the boot, located near the light containing the …
How to replace the rear headlight bulb of the Renault Clio 4
How to replace the rear headlight bulb of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The steps to replace the rear headlight bulb of the Renault Clio 4 are: -open the trunk; -remove the side cover, located on the trunk cover; -unscrew…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos