Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tail light bulb

The steps to replace the rear headlight bulb of the Renault Clio 4 are: -open the trunk; -remove the side cover, located on the trunk cover; -unscrew the internal screw; -remove the headlight; -disconnect the headlight connector; -clean the internal housing of the headlight; -replace the bulb with a new one; -connect the connector; -insert the headlight; -tighten the internal screw; -close the cover; Once the trunk is closed, you can turn on the instrument panel and vehicle lights to test their operation. To replace the right headlight, you will need to follow the same steps.

Posted on 31 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Renault Clio 3?
How to Replace the Rear Light Bulb on the Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the rear light bulb on the Renault Clio 3, open the tailgate of the boot and loosen the screws found between the seal and the light. This …
How to disassemble the rear fog light of the Renault Clio.
How to disassemble the rear fog light of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let…
How to replace the rear fog light bulb on the Renault Clio
How to replace the rear fog light bulb on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will allow us to disassemble and replace the rear fog light bulb of the Renault Clio. First, let's move to the rear of the car an…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos