Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

If you want to replace the rear light bulb on your Renault Clio Mk3 (2005-2013) but don't know how, don't worry as we will discover step by step what you need to do. First, park the car safely and turn it off completely. Then, go to the outside and lift the rear hatch.

Next, get a small cross-head screwdriver and unscrew all the screws that secure the light in place. Once done, remove the cover and replace the old faulty bulb with a new one.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Renault Clio 3?
How to Replace the Rear Light Bulb on the Renault Clio 3?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the rear light bulb on the Renault Clio 3, open the tailgate of the boot and loosen the screws found between the seal and the light. This …
How to Replace the Rear Light Bulb on a Renault Clio Mk2
How to Replace the Rear Light Bulb on a Renault Clio Mk2
Renault Clio (1998-2005 / MK 2, Clio 2) In this guide, we will describe the various steps required to correctly and independently replace the rear light bulb on your Renault Clio Mk2. The e…
How to Replace the Rear Light Bulb of a Renault Clio
How to Replace the Rear Light Bulb of a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the rear light bulb on a Renault Clio 4, open the tailgate and locate the lining on the inside of the boot that allows access to the light…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos