Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the beam of the headlights of a Renault Kangoo MK2

Model: Renault Kangoo FW, FC, MK 2 - Years 2007-2021
Part: Headlight

To adjust the height of the light beam of the headlights of the Renault Kangoo II, put the gear in neutral, start the engine, and make sure the position of the lights is set to "zero". Check that the tire pressure is correct, as indicated by the sticker on the driver's side door sill. Vertical adjustments are made by the screw above each headlight; the horizontal adjuster can be found in a slightly more hidden position, but still visible enough, inside the engine compartment, as shown by the YouTuber. It must be turned with an 8mm key.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the beam of the Renault Kangoo headlights
How to adjust the beam of the Renault Kangoo headlights
Renault Kangoo (2007-2021 / FW, FC, MK 2) In this video we can see how to adjust the beam of the front headlights of the Renault Kangoo: we will need an 8mm wrench and a flat head screwdriver…
How to adjust the time in the Renault Kangoo?
How to adjust the time in the Renault Kangoo?
Renault Kangoo (2007-2021 / FW, FC, MK 2) In this tutorial, we can see how to adjust the time in the Renault Kangoo, an extremely simple and quick operation to be carried out, for example, af…
How to adjust the time on the Renault Kangoo?
How to adjust the time on the Renault Kangoo?
Renault Kangoo (2007-2021 / FW, FC, MK 2) In this tutorial, we can see how to adjust the time in the Renault Kangoo, a very simple and quick operation, to be done, for example, after replacin…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos