Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the MG - Roewe Rx5

Model: Roewe Rx5 MK 1 - Years 2016-2023
Part: Speaker

Let's find out the main instructions that will allow us to disassemble and replace the original speakers of the Mg Rx5, but also of the Roewe. First of all, we open the front door and start by removing the door panel, unscrewing all the fixing screws and disconnecting the electric connector of the window control panel; finally disconnect the handle cable. At this point we are going to unscrew the speaker screws, disconnecting the electrical connector on the back to remove it and replace it with the new one; we apply the reverse procedure for reassembly!

Posted on 4 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
Roewe Rx5 (2019-2026 / ) .. to reset the tire pressure warning light on the Roewe RX5 and MG RX5; before carrying out the operation it is necessary that all four tires are at working.. …
Installation of rear steel silencers on a Roewe RX5
Installation of rear steel silencers on a Roewe RX5
Roewe Rx5 (2019-2026 / ) .. install the steel finished rear silencers on the Roewe RX5. Our Youtuber bought them from an e-commerce platform. There are both black (35.90 on Amazon,.. …
How to recharge the battery of the Roewe Rx5
How to recharge the battery of the Roewe Rx5
Roewe Rx5 (2019-2026 / ) .. we will see how to recharge the battery of the Roewe Rx5, following these simple and quick steps. First of all, let's place the car on the charging.. …

Other guides you may be interested in

How to Change the Solenoid Bleed Valve on a Mazda-6

Open the bonnet and secure it. Use pliers to remove the metal clamps from the hoses in the engine bay, then remove the valve from both ends and disconnect the power connector by hand. After comparing the damaged valve with the new one, fit it onto the hoses in the engine bay, securely tighten it with the metal clamps, and reconnect the connector. Test the car to ensure it is functioning correctly.

Watch the video!


by ScegliAuto

More videos