Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Better Speakers in the Citroen C2

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Speaker

Video tutorial

In this video, we will see how to replace the standard speakers in the Citroen C2 with better ones. You can find the front ones, for example, on eBay with the code 164172568330 for £67.64, delivery £17.93. Remove the front door panel by unlocking the clips with a flat screwdriver.

The original speakers are fixed with rivets, so they will need to be removed with a drill (and some may end up inside the door). Disconnect the electrical cables.

For the rear, detach the side panel by pulling firmly; the procedure for the rivets is the same. For mounting the new speakers, use self-tapping screws instead of rivets, connect the cables, and insulate with electrical tape.

For the front speakers, fit the speaker into the original hole and screw it in; for the rear, position the speaker and secure it. Turn on the system and check: there should be no abnormal vibrations caused by rubbing, and the sound should be clear, with a noticeable improvement over previous performance.

Have some spare clips on hand as it is inevitable that some will break; insulate the cables well to avoid short circuits.

When buying speakers, ensure that the dimensions are compatible.


Posted on 21 February 2026 by ScegliAuto


Related tutorials

Citroen C2 (2003-2010 / MK 1) Before you begin, open the bonnet of the Citroen C2. Start by removing the rear cover of the blown bulb. Next, disconnect the electrical connector. A…
Citroen C2 (2003-2010 / MK 1) Need to remove the brake disc on a Citroen C2? Start by removing the wheel to access the brake disc. Lift the car on a column jack to the desired hei…
Citroen C2 (2003-2010 / MK 1) If you want to manually reset the service light of your Citroen C2, you just need to follow these steps. First of all, enter the passenger compartmen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos