Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Brake Disc on Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Brake rotors

Need to remove the brake disc on a Citroen C2? Start by removing the wheel to access the brake disc. Lift the car on a column jack to the desired height, then remove the wheel with the respective bolts (using a socket wrench or air drill). Unscrew the locking bolt of the brake caliper and remove the caliper from its bracket. Use a socket wrench to detach the caliper bracket from the wheel hub. Unscrew the brake disc securing screws with a screwdriver (remove the disc from the wheel hub). Prepare to fit the new disc with the respective pads. After installation, test the brake functionality.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen C2
How to Reset the Service Light on a Citroen C2
Citroen C2 (2003-2010 / MK 1) After changing the engine oil on your Citroen C2, you also need to reset the service light. This tutorial shows how to perform this operation in a fe…
How to Replace the Gearbox Oil on a Citroën C2?
How to Replace the Gearbox Oil on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the gearbox oil on a Citroën C2, lift the car to access its underside. Once the car is lifted, position a container under the gearbox, whi…
How to reset the tire pressure on a Citroen C2?
How to reset the tire pressure on a Citroen C2?
Citroen C2 (2003-2010 / MK 1) In this video we can see how to reset the tire pressure on a Citroen C2: on this model it is not something immediate that is done through simply pres…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos