Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Wheel on a Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Wheel

In this short and simple guide, you will learn the procedure to remove and replace the wheel with the spare on a Citroen C2. First, open the rear tailgate and start by removing the cap located above the bumper, unscrewing the screw inside with the appropriate tool; this will lower the spare wheel from the floor, as shown in the video. Next, loosen the bolts with the socket, then raise the vehicle with the jack; remove and replace the wheel with the spare, tightening the bolts in a criss-cross pattern!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Citroen C2.
How to replace the front brake pads of the Citroen C2.
Citroen C2 (2003-2010 / MK 1) Today we will see step-by-step instructions on how to disassemble and replace the front brake pads of the Citroen C2. First, we lift the vehicle and …
Where is the Spare Wheel on the Citroën C2?
Where is the Spare Wheel on the Citroën C2?
Citroen C2 (2003-2010 / MK 1) The spare wheel of the Citroën C2 is located at the bottom of the car, in the boot area. To access it, open the tailgate and lower the step at the bo…
Guide on How to Change the Timing Belt of the Citroen C2 1.1
Guide on How to Change the Timing Belt of the Citroen C2 1.1
Citroen C2 (2003-2010 / MK 1) In this guide, follow the main steps to remove and replace the timing belt of the Citroen C2 1.1 petrol engine, as well as the C3 with the same engin…

    Frequently Asked Questions

    • C2 2003-2010 - Where is the spare wheel in the Citroen C2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos