Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb of a Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Headlight bulb

Before you begin, open the bonnet of the Citroen C2. Start by removing the rear cover of the blown bulb. Next, disconnect the electrical connector. At this point, release the bulb retaining clip. Once you have completed this step, you can remove the bulb, completing the disassembly. To fit the new bulb and close everything up, simply reverse these steps, and you will have finished the replacement.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Indicator Bulb on a Citroen C2
Replacing the Front Indicator Bulb on a Citroen C2
Citroen C2 (2003-2010 / MK 1) This guide outlines the steps to remove and replace all bulbs in the front headlamp, including the position bulb, dipped beam, main beam, and the ind…
How to replace the front headlight bulb of the Citroen C2
How to replace the front headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Citroen C2. Fir…
How to replace the headlight bulb of the Citroen C2
How to replace the headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this article, we will show you how to replace the headlight bulb of the Citroen C2. No tools are needed for this operation. To replace the bulb, f…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos