Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Indicator Bulb on a Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Headlight bulb

This guide outlines the steps to remove and replace all bulbs in the front headlamp, including the position bulb, dipped beam, main beam, and the indicator of the Citroen C2. First, open the bonnet of your car and start by removing the protective cover of the bulbs if you want to replace the dipped beam bulb; the position bulb and indicator can be replaced by unscrewing the bulb holder and removing the bulb from it, as shown in the video. Ensure the bulbs have the same fitting!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bulb of a Citroen C2
How to Replace the Front Bulb of a Citroen C2
Citroen C2 (2003-2010 / MK 1) Before you begin, open the bonnet of the Citroen C2. Start by removing the rear cover of the blown bulb. Next, disconnect the electrical connector. A…
How to replace the front headlight bulb of the Citroen C2
How to replace the front headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Citroen C2. Fir…
How to replace the headlight bulb of the Citroen C2
How to replace the headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this article, we will show you how to replace the headlight bulb of the Citroen C2. No tools are needed for this operation. To replace the bulb, f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos