Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulbs on Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Tail light bulb

Let's see how to remove and replace the bulbs of the rear headlight on a Citroen C2 by following these simple instructions. First, open the boot lid and unscrew the fixing bolt of the headlight located on the side using a 10 mm spanner; then, pull the lamp unit out from the outside and disconnect the electrical connector of the bulbs. At this point, release the side levers and remove the bulb holder along with the bulbs; press and twist to replace them with new ones, as shown in the video. Reassemble everything by applying the reverse procedure!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Indicator Bulb on a Citroen C2
Replacing the Front Indicator Bulb on a Citroen C2
Citroen C2 (2003-2010 / MK 1) This guide outlines the steps to remove and replace all bulbs in the front headlamp, including the position bulb, dipped beam, main beam, and the ind…
How to Replace the Rear Light Bulb on a Citroën C2?
How to Replace the Rear Light Bulb on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the rear light bulb on a Citroën C2, open the tailgate to access the side of the boot corresponding to the light. Here, locate the screw s…
How to replace the headlight bulb of the Citroen C2
How to replace the headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this article, we will show you how to replace the headlight bulb of the Citroen C2. No tools are needed for this operation. To replace the bulb, f…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos