Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Samsung
    3. : Qm6

Samsung Qm6 - Videoguide

Samsung Qm6 (2016-2023 / MK 1)
How to remove the door panel on the Samsung Qm6?
The door panel is held in place by screws located underneath the internal handle and above the plastic handle where the power window switch is installed. The …read all…
Posted on 14 May 2023 by ScegliAuto
Samsung Qm6 (2016-2023 / MK 1)
How to replace the battery of Samsung Qm6?
Let's see what are the instructions for replacing the battery on the car: first of all open the bonnet, the battery is located in the front part of the engine …read all…
Posted on 21 November 2022 by ScegliAuto
Samsung Qm6 (2016-2023 / MK 1)
How to replace the cabin filter in Samsung QM6?
In this tutorial we can see how to replace the cabin filter in the Samsung QM6, a very simple and fast operation. First of all let's position ourselves on the …read all…
Posted on 21 November 2022 by ScegliAuto
Samsung Qm6 (2016-2023 / MK 1)
How to replace the engine oil and oil filter of the Samsung Qm6
In today's video we will see the instructions that will allow us to replace the engine oil and oil filter of the Samsung Qm6. First we lift the car and start …read all…
Posted on 1 May 2022 by ScegliAuto
Samsung Qm6 (2016-2023 / MK 1)
How to replace the Samsung QM6 remote control battery?
As we can see in this tutorial, replacing the Samsung QM6 remote control battery is very simple. For this operation we will need to get a CR2032 replacement …read all…
Posted on 25 April 2024 by ScegliAuto
Battery (1) Key (1) Cabin air filter (1) Engine oil (1) Door panel (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos