Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Samsung QM6?

Model: Samsung Qm6 MK 1 - Years 2016-2024
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in the Samsung QM6, a very simple and quick operation. First, position yourself in the passenger seat, then remove the vertical panel located at the joint between the center console and the dashboard. Once done, go underneath the dashboard, locate the long rectangular cover, and open it. At this point, you can remove the old filter and insert the replacement, making sure to respect its orientation, usually indicated on the edge. Finally, reattach both the cover and the panel.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Oil Filter on the Samsung Qm6
Samsung Qm6 (2016-2024 / MK 1) In today's video, you will see the instructions to replace the engine oil and oil filter on the Samsung Qm6. First, lift the vehicle and start unscre…
How to Replace the Battery in the Samsung QM6 Remote?
How to Replace the Battery in the Samsung QM6 Remote?
Samsung Qm6 (2016-2024 / MK 1) As you can see in this tutorial, replacing the battery in the Samsung QM6 remote is very simple. For this operation, you will need a replacement batt…
How to Replace the Battery in the Samsung Qm6?
How to Replace the Battery in the Samsung Qm6?
Samsung Qm6 (2016-2024 / MK 1) Here are the instructions for replacing the battery in the vehicle: first, open the hood; the battery is located at the front of the engine compartme…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos