Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on the Samsung Qm6

Model: Samsung Qm6 MK 1 - Years 2016-2024
Part: Engine oil

In today's video, you will see the instructions to replace the engine oil and oil filter on the Samsung Qm6. First, lift the vehicle and start unscrewing the oil drain bolt located on the oil pan, allowing it to drain into a container for about ten minutes. Then, use the appropriate wrench to unscrew and remove the oil filter cartridge, as illustrated in the video. At this point, hand-tighten and gently secure the new oil filter; unscrew the fill cap to pour in the new oil, also replacing the air filter to complete the service!

Updated on 20 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Cabin Filter in the Samsung QM6?
How to Replace the Cabin Filter in the Samsung QM6?
Samsung Qm6 (2016-2024 / MK 1) In this tutorial, you will see how to replace the cabin filter in the Samsung QM6, a very simple and quick operation. First, position yourself in the…
How to Replace the Battery in the Samsung QM6 Remote?
How to Replace the Battery in the Samsung QM6 Remote?
Samsung Qm6 (2016-2024 / MK 1) As you can see in this tutorial, replacing the battery in the Samsung QM6 remote is very simple. For this operation, you will need a replacement batt…
How to Replace the Battery in the Samsung Qm6?
How to Replace the Battery in the Samsung Qm6?
Samsung Qm6 (2016-2024 / MK 1) Here are the instructions for replacing the battery in the vehicle: first, open the hood; the battery is located at the front of the engine compartme…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos