Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Samsung QM3 (Renault Captur)

Model: Samsung Qm3 MK 1 - Years 2013-2019
Part: Air filter

To replace the air filter in the vehicle, follow these simple steps: Open the hood and locate the box containing the filter, which is situated at the top of the engine bay above the battery. Unclip the two retaining clips on the filter cover and then lift the cover. You will now have access to the compartment containing the filter. Remove the old filter and take the new one (always check the specifications of the filter being replaced to ensure compatibility with the vehicle). Finally, reattach the clips on the cover, and you're done.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Samsung QM3?
How to Replace the Cabin Filter in the Samsung QM3?
Samsung Qm3 (2013-2019 / MK 1) Replacing the cabin filter in the Samsung QM3 is a very simple and inexpensive task. First, go to the passenger seat and locate the long rectangular …
How to Replace the Diesel Filter on the Samsung QM3?
How to Replace the Diesel Filter on the Samsung QM3?
Samsung Qm3 (2013-2019 / MK 1) To replace the diesel filter on the Samsung QM3, lift the front of the car using a jack so that the right front wheel is off the ground. Once the whe…
How to Replace the Battery in a Samsung Qm3
Samsung Qm3 (2013-2019 / MK 1) In this brief guide, you will find the necessary instructions to remove and replace the battery in a Samsung Qm3. First, open the hood of your car an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos