Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Filter on the Samsung QM3?

Model: Samsung Qm3 MK 1 - Years 2013-2019
Part: Diesel fuel filter

To replace the diesel filter on the Samsung QM3, lift the front of the car using a jack so that the right front wheel is off the ground. Once the wheel is lifted, loosen the mounting bolts and completely remove the wheel to access the components underneath. You will need to remove the inner wheel well cover by unscrewing its mounting screws to access the filter located behind it. Disconnect the filter and remove it from its mounting screws to insert a new one.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Samsung Qm3 (2013-2019 / MK 1) Replacing the cabin filter in the Samsung QM3 is a very simple and inexpensive task. First, go to the passenger seat and locate the long rectangular …
Samsung Qm3 (2013-2019 / MK 1) To replace the cabin filter in the Samsung QM3, remove the panel on the left side of the footwell from the front passenger side. Once this panel is r…
Samsung Qm3 (2013-2019 / MK 1) In this brief guide, you will find the necessary instructions to remove and replace the battery in a Samsung Qm3. First, open the hood of your car an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos