Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing Engine Oil and Filter for the Samsung SM6

Model: Samsung Sm6 MK 1 - Years 2016-2023
Part: Engine oil

Follow these main instructions to replace the engine oil and oil filter of the Samsung SM6 during routine maintenance. First, lift the vehicle and remove the oil drain plug located under the engine, allowing the oil to drain into a container for about ten minutes. Next, remove the oil filter cartridge and replace it with a new one (screw it in by hand and then tighten it with a wrench). At this point, open the hood and remove the fill cap, topping off the oil and finally checking the oil level!

Updated on 24 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Filter on the Samsung SM6?
How to Replace the Air Filter on the Samsung SM6?
Samsung Sm6 (2016-2023 / MK 1) To replace the air filter on the Samsung SM6, open the hood to access the components inside the engine compartment. The air filter is located in the …
Replacing the Cabin Air Filter in the Samsung SM6
Replacing the Cabin Air Filter in the Samsung SM6
Samsung Sm6 (2016-2023 / MK 1) Let's discover the main steps that will allow us to remove and replace the cabin air filter in the Samsung SM6. First, get in the vehicle on the pass…
How to Reset the Service Light on the Samsung SM6?
How to Reset the Service Light on the Samsung SM6?
Samsung Sm6 (2016-2023 / MK 1) To reset the Service light on the Samsung SM6, access the instrument cluster and navigate the menu on the display using the arrow buttons on the righ…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos