Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the Samsung SM6

Model: Samsung Sm6 MK 1 - Years 2016-2023
Part: Glove compartment

In this video tutorial, you will see how to remove and replace the glove compartment of the Samsung SM3 by following the instructions below. First, get inside the vehicle on the passenger side and start removing the plastic pieces around the glove compartment using a thin lever. Then, unscrew the screws located underneath using a Torx screwdriver, as shown in the video. Once the panels are removed and all screws are unscrewed, you can take out the glove compartment. Finally, reassemble everything by applying the reverse procedure!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Wheel Airbag on the Samsung SM6
How to Replace the Steering Wheel Airbag on the Samsung SM6
Samsung Sm6 (2016-2023 / MK 1) Today, you will learn in this video tutorial how to remove and replace the steering wheel airbag on the Samsung SM6, following the instructions below…
How to Replace the Accelerator Pedal on the Samsung Sm6
How to Replace the Accelerator Pedal on the Samsung Sm6
Samsung Sm6 (2016-2023 / MK 1) Discover how to remove and replace the accelerator pedal on the Samsung Sm6 in simple and quick steps. First, open the front door on the driver’s sid…
How to Replace the Air Filter on the Samsung SM6?
How to Replace the Air Filter on the Samsung SM6?
Samsung Sm6 (2016-2023 / MK 1) To replace the air filter on the Samsung SM6, open the hood to access the components inside the engine compartment. The air filter is located in the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos