Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Lights on the Samsung SM7?

Model: Samsung Sm7 L47 - Years 2011-2019
Part: Tail light

In this tutorial, you will see how to remove the tail lights on the Samsung SM7, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition for safety. Start by opening the trunk, then remove the small panel located at the back of the light in question and unscrew the three nuts with a 5/16" wrench. Once done, disconnect the rear power connector and pull the light towards you, extracting it from the body. To install the replacement, simply follow the reverse procedure.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of the Samsung SM7
Samsung Sm7 (2004-2011 / EX2) In this short and simple guide, see how to disassemble and replace the battery of the Samsung SM7. First, open the hood of your car and start unscrew…
How to Replace the Remote Battery in a Samsung SM7?
How to Replace the Remote Battery in a Samsung SM7?
Samsung Sm7 (2004-2011 / EX2) In this tutorial, you will see how to replace the battery in the remote for the Samsung SM7. For this simple and quick operation, you will not need a…
How to Replace the Outside Rearview Mirror on a Samsung SM7?
How to Replace the Outside Rearview Mirror on a Samsung SM7?
Samsung Sm7 (2011-2019 / L47) To replace the door panel on a Samsung SM7, first remove the corresponding door panel. To do this, unscrew the fastening screws located at the bottom…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos