Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Samsung
  4. :
  5. Sm6
  6. : How to install the decorative exhaust pipes on the bumper of Samsung Sm6

Samsung Sm6 - Video tutorial

Model: Samsung Sm6 MK 1 - Years 2016-2023
Part: Rear bumper
Operation: How to install the decorative exhaust pipes on the bumper of Samsung Sm6

In this video we will show you how to install decorative exhaust pipes on the bumper of the Samsung Sm6. First, get yourself a pair of exhaust pipes to place on the two sides of the bumper as seen in the video. Polish the chrome of the metal part before assembling them. Take the plastic bumper and trace the two slots in which you intend to place the pipes with gummed paper. With a cutter, remove the plastic part delimited by the tape and fit the two ornamental tubes together. Once this is done, remove the central part of the rear bumper of the car as seen in the video and mount the new one.


Posted on 8 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos