Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Light on a Renault Samsung Sm6

Model: Samsung Sm6 MK 1 - Years 2016-2023
Part: License plate light

As shown in the video, to change the license plate light on a Renault Samsung Sm6, first remove the housing where the license plate light is located above the license plate using a flathead screwdriver. Disconnect the connector and remove the clear plastic cover protecting the bulb by simply unlocking it from its clips. Inside, you will find the burnt-out bulb; detach it and replace it with a new one. Press the new bulb into its housing. You can also use an LED light like the one shown in the video. Reattach the clear cover and reconnect the connector. Finally, place the light back in its position.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Samsung SM6?
How to Replace the Air Filter on the Samsung SM6?
Samsung Sm6 (2016-2023 / MK 1) To replace the air filter on the Samsung SM6, open the hood to access the components inside the engine compartment. The air filter is located in the …
How to Replace the Steering Wheel Airbag on the Samsung SM6
How to Replace the Steering Wheel Airbag on the Samsung SM6
Samsung Sm6 (2016-2023 / MK 1) Today, you will learn in this video tutorial how to remove and replace the steering wheel airbag on the Samsung SM6, following the instructions below…
How to Reset the Service Light on the Samsung SM6?
How to Reset the Service Light on the Samsung SM6?
Samsung Sm6 (2016-2023 / MK 1) To reset the Service light on the Samsung SM6, access the instrument cluster and navigate the menu on the display using the arrow buttons on the righ…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos