Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Alhambra
    4. : Headlight bulb

Seat Alhambra - Headlight bulb

Headlight Bulb Seat Alhambra (2000-2010 / mk 1)

Seat Alhambra (2000-2010 / MK 1)
How to Replace the Front Headlight Bulb on a Seat Alhambra?
To replace the front headlight bulb on a Seat Alhambra, lift the flap located inside the wheel arch corresponding to the bulb you wish to replace. By lifting …Read all…
Posted on 25 August 2026 by ScegliAuto
Seat Alhambra (2000-2010 / MK 1)
Replacing Front Headlamp Bulb
To replace the front headlamp bulb, there is not much room to manoeuvre, but with a bit of patience, it can be done without removing anything. Start by …Read all…
Posted on 24 February 2026 by ScegliAuto
Battery (1) Glow plugs (1) Body (1) Timing belt (1) Checks and maintenance (1) Tail light (1) Fog lights (1) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Handle (1) Door trim panel (2) Car door (1) Power window switch (1) Heater core (1) Fuse box (10) Seat (2) AdBlue warning light (7) Warning light – error code (2) (6) Tire pressure warning light (1) Service warning light (23) Fuel cap (1)

How to Reset the Tyre Pressure Warning Light on a Kia Sportage?

To reset the tyre pressure warning light on a Kia Sportage, simply inflate the tyres to the recommended pressure: for this model, the recommended inflation pressure for each tyre is 2.4 bar and is indicated on the sticker affixed to the driver’s door pillar. Once the tyre pressures have been restored to the recommended value, turn on the ignition to check that the new pressures are registered by the sensors: after a few seconds, you will notice that the warning light will turn off.

Watch the video!


by ScegliAuto

More videos