Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the electronic handbrake of the Renault Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

To reset the electronic handbrake on the Renault Scenic, turn on the instrument panel by inserting the ignition key into its slot. Once the panel is on, remove the protective panel of the dashboard located at the bottom left of the steering column.

This will allow you to extract the handbrake button and disconnect the connector from the entire device. The lever on the button must be pulled down and then lifted again to restore the handbrake.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Manually Disable the Electronic Handbrake on a Renault Scenic
How to Manually Disable the Electronic Handbrake on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this video, you will see how to manually disable the electronic handbrake in case of an emergency on a Renault Scenic. As the YouTuber mentions, t…
How to Reset the Handbrake on the Renault Scenic 3?
How to Reset the Handbrake on the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) If the electronic handbrake on your Renault Scenic 3 is stuck, simply due to a temporary electronic error, you can attempt a DIY reset, all in an eas…
How to reset the electronic handbrake on the Renault Scenic?
How to reset the electronic handbrake on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To reset the electronic handbrake on the Renault Scenic, switch on the instrument cluster by inserting the ignition key into the ignition barrel. Onc…

    Frequently Asked Questions

    • Scenic 2003-2009 - How to enter the radio code of the Renault Scenic year 2003? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos