Do it yourself
| ||||
|
Ford Puma - Video tutorial
Model: Ford Puma
MK 1
- Years 2019-2024 As we can see in this tutorial, changing the battery of the Ford Puma remote control is an extremely simple and fast operation. To do this, we will need a small flat tip screwdriver and a spare CR2032 type battery. First of all, we extend the metal emergency key through the action of the appropriate button, after which we identify the slot indicated, leverage with the screwdriver and separate the rear door. Once this is done, we can remove the old battery, insert the spare one respecting the polarity and put everything back together.
Posted on 14 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |