Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance of the Seat Altea

Model: Seat Altea MK 1 - Years 2004-2015
Part: Onboard computer

In this article we will see how to reset the maintenance light on the Seat Altea. This procedure is necessary in case the light remains on after having performed the car's service. No tools are needed to perform this procedure. To reset it, you will need to insert the key, then press the reset button located in the center of the dashboard, holding it down start the dashboard, once the dashboard is started wait for the audible signal, when you hear the audible signal, turn the button to the right, at this point the procedure will be complete. You can then restart the dashboard to verify that the procedure has been carried out correctly.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio on a Seat Altea
Removing the Radio on a Seat Altea
Seat Altea (2004-2015 / MK 1) Is the radio in your Seat Altea to be replaced? Here’s how to remove it using removal keys. Insert the removal keys at the sides of the plastic trim …
How to replace the air filter of the Seat Altea
How to replace the air filter of the Seat Altea
Seat Altea (2004-2015 / MK 1) To correctly replace the engine air filter on your Seat Altea, you simply need to follow the steps described in our new guide. First of all, make sur…
How to Reset the Service Light on a Seat Altea
How to Reset the Service Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) Today, follow these instructions to reset the service light for routine maintenance on your Seat Altea. First, get into the vehicle and turn on the i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos