Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the third brake light bulbs of the Seat Altea XL.

Model: Seat Altea MK 1 - Years 2004-2015
Part: Tail light bulb

In this video tutorial, we will see how to disassemble and replace the brake light bulb of the third stop of the Seat Altea, in simple steps. First, we open the rear tailgate of the trunk and start by disconnecting the internal plastic clip, then disconnecting the electrical connector of the bulbs; then we remove the third stop light from the outside of the trunk tailgate, as shown in the video. At this point, we remove and replace any faulty bulbs with new ones, of the correct type and with the same attachment; finally, we reassemble the third stop light!

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Dome Light Bulbs on a Seat Altea
How to Replace the Front Dome Light Bulbs on a Seat Altea
Seat Altea (2004-2015 / MK 1) How to replace the front dome light bulbs on a Seat Altea? Let's see how to remove the lens and the bulbs. Pry between the clear lens and the dome li…
Replacement of the rear taillight of the Seat Altea
Replacement of the rear taillight of the Seat Altea
Seat Altea (2004-2015 / MK 1) The following steps will show us how to disassemble and replace the rear taillight of the Seat Altea, following the instructions below. First, we ope…
How to Replace the Brake Pedal Switch on a Seat Altea
How to Replace the Brake Pedal Switch on a Seat Altea
Seat Altea (2004-2015 / MK 1) Have you encountered issues with the brake pedal switch on your Seat Altea? Here’s how to remove and replace the part. Open the inspection hatch at t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos