Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Seat
  4. :
  5. Altea
  6. : How to replace the pedal switch on a Seat Altea

Seat Altea - Video tutorial

Model: Seat Altea MK 1 - Years 2004-2015
Part: Checks and maintenance
Operation: How to replace the pedal switch on a Seat Altea

Have you encountered problems with the brake pedal button on your Seat Altea? Let's see together how to proceed with the disassembly and reassembly of the piece. We open the inspection compartment at the bottom left of the dashboard (if present). We put our hand in and go to reach the pedal brake button (from the bottom of the pedal brake)). Press the button until the connector comes out of its seat, then disconnect it from the power cable. We assemble the new brake button: first by connecting the plug to the button, then we insert the same in the housing. Finally we test the correct functioning of the brake.


Posted on 20 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Altea 2004-2015 - What problems does the Seat Altea 1.9 TDI have? Read Answer
    • Altea 2004-2015 - What are the main issues with the Seat Altea Xl 1.6 TDi with 105 horsepower? Read Answer
    • Altea 2004-2015 - What are the problems with the Seat Altea? Read Answer
    • Altea 2004-2015 - What problems could the Seat Altea XL 1.6 TDI 105 CV have presented in the past? Read Answer
    • Altea 2004-2015 - What are the problems of the Seat Altea 1.6 petrol? Read Answer
    • Altea 2004-2015 - How do you remove the Seat Altea steering lock? Read Answer
    • Altea 2004-2015 - What are the most common problems of the Seat Altea? Read Answer
    • Altea 2004-2015 - What are the problems of the Seal Altea XL? Read Answer
    • Altea 2004-2015 - What problems could the SEAT Altea 1.6 TDI present? Read Answer
    • Altea 2004-2015 - What are the problems with the central locking of the Seat Altea due to? Read Answer
    • Altea 2004-2015 - What are the main problems of the Seat Altea XL? Read Answer
    • Altea 2004-2015 - How to turn off the door light of a Seat Altea? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos