Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Altea
    4. : Where are the fuses located in the Seat Altea?

Seat Altea - Video tutorial

Model: Seat Altea MK 1 - Years 2004-2015
Part: Fuse box
Operation: Where are the fuses located in the Seat Altea?

The fuses of the Seat Altea are contained within the appropriate fuse boxes that are installed in the vehicle: in this car model, it is possible to identify two boxes. The first one is located in the lower left part of the dashboard, relative to the steering column: it contains the fuses that are responsible for the functioning of the airbags, rear window wiper, brake pedal switch, etc. The second box is instead located in the right side of the engine compartment: it contains the fuses that are responsible for the functioning of the radio, power windows, etc.


Posted on 19 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Altea 2004-2015 - Where is the Seat Altea fuel pump fuse located? Read Answer
    • Altea 2004-2015 - Where are the fuse boxes of the Seat Altea Freetrack located? Read Answer
    • Altea 2004-2015 - Where is the central locking fuse of the Seat Altea located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos