Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light of the Seat Ateca 2024

Model: Seat Ateca - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

This operation must be done with the vehicle off: open and close the door to ensure all systems are properly shut down. Press the hazard light button and let it flash at least four times.

Now press the start button (or turn the key) to turn on the ignition. Using the dial on the right side, navigate through the dashboard menu: scroll down until you find "settings". Press the "ok" button to enter.

Scroll until you find "service" and enter here with "ok", then select "reset oil service" and confirm with "ok", waiting for the system to display the message "service completed". If necessary, repeat the same procedure for "reset inspection" and then turn off the ignition.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

Seat Ateca (2016-2025 / MK 1) To reset the service light on a Seat Ateca, follow the same procedure as for a Volkswagen or Skoda. First, turn on the ignition; then press the Menu …
Seat Ateca (2016-2025 / MK 1) To reset the Service light on a Seat Ateca, turn on the instrument cluster by turning the ignition key and then navigate through the menu on the onbo…
Seat Ateca (2016-2025 / MK 1) To reset the "Service" light on a Seat Ateca, start by turning on the instrument panel without starting the engine, by pressing the ignition button. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos