Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses Located in a Seat Leon?

Model: Seat Leon 1P - Years 2005-2013
Part: Fuse box

The fuse boxes in the Seat Leon include one in the cabin, located on the left side of the dashboard, under the light control; below this control, there is a small cover that you need to remove to access the fuses. The other fuse box is located in the engine compartment between the left pillar and the battery; to access the fuses, remove the cover by disengaging it from the clips. To replace a fuse, identify it, grasp it with small pliers, pull it out, and check if the bridge inside is intact; if the bridge is broken, the fuse needs to be replaced. Replace a fuse with one of the same amperage.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Seat Leon?
Where are the fuses located in the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) The fuses in the Seat Leon are divided between two fuse boxes located within the vehicle: the first is situated inside the cabin, behind the glove co…
Where are the fuses located on a Seat Leon?
Seat Leon (1999-2005 / 1M) The fuse boxes on the Seat Leon contain the fuses that control the operation of the vehicle's devices: in this type of vehicle, there is a single fus…
Where are the fuses located in the Seat Leon?
Where are the fuses located in the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) The fuses in the Seat Leon are divided between two fuse boxes located within the vehicle: the first is positioned inside the cabin. This is found low…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos