Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulb of the Rear Light on the Seat Altea

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

Here are the useful steps to remove and replace the bulb of the rear light on the Seat Altea. First, open the boot lid and begin unscrewing the fixing screws found on the side of the light.

Then, unscrew the plastic screw located at the back by opening the side flap of the boot, as shown in the video. Now, disconnect the electrical connector of the light, unscrewing the plastic screws of the bulb holder to access it; replace the faulty bulb with a new one and reassemble the light!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light on a Seat Altea
Replacing the Rear Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) The following steps will show you how to remove and replace the rear light on a Seat Altea, following the instructions below. First, open the tailgat…
How to Replace the Number Plate Light on a Seat Altea
How to Replace the Number Plate Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) Replacing the number plate light on a Seat Altea. Learn how to replace the damaged bulb. Open the boot lid, and using a screwdriver or plastic lever,…
How to Remove the Rear Light on the Seat Altea
How to Remove the Rear Light on the Seat Altea
Seat Altea (2004-2015 / MK 1) In this brief guide, we will discover the steps to remove and replace the rear light on the Seat Altea. First, open the boot lid and disconnect the e…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos