Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Seat Altea

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

Video tutorial

The following steps will show you how to remove and replace the rear light on a Seat Altea, following the instructions below. First, open the tailgate of the boot and start unscrewing the two mounting screws found on the side of the light; then unscrew the plastic screw located at the back and finally disconnect the electrical connector of the bulbs, as illustrated in the video.

At this point, remove the rear light and replace it if necessary with the new one, securing it to the bodywork and reconnecting the electrical lights!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Seat Altea
How to Replace the Air Filter on a Seat Altea
Seat Altea (2004-2015 / MK 1) To correctly replace the engine air filter on your Seat Altea, simply follow the steps outlined in this guide. First, ensure your Seat Altea is compl…
Where is the fuse box of the Seat Altea located?
Where is the fuse box of the Seat Altea located?
Seat Altea (2004-2015 / MK 1) Today we will explain where the fuse box of the 2006 Seat Altea is located. The Seat Altea has two fuse boxes. The first fuse box is located inside t…
How to Replace the LPG Filter on a Seat Altea
How to Replace the LPG Filter on a Seat Altea
Seat Altea (2004-2015 / MK 1) The LPG filter is located in the bottom right corner of the engine compartment. To access it, start by opening the bonnet. Next, unscrew the screws s…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos