Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filter on a Seat Altea

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel filter

Video tutorial

The LPG filter is located in the bottom right corner of the engine compartment. To access it, start by opening the bonnet.

Next, unscrew the screws securing the metal clips that hold the hoses to the filter. Once the clips are loosened, disconnect the two hoses.

After disconnecting the hoses, you can remove the filter. To install the new LPG filter, simply follow these instructions in reverse.

This way, you will have successfully completed the LPG filter replacement on a Seat Altea.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing LPG Injectors from Seat Altea 1.6i
Removing LPG Injectors from Seat Altea 1.6i
Seat Altea (2004-2015 / MK 1) In this video, you will see instructions on how to remove the LPG injectors from a Seat Altea 1.6i. First, open the bonnet; then disconnect all four …
How to Replace the Air Filter on a Seat Altea
How to Replace the Air Filter on a Seat Altea
Seat Altea (2004-2015 / MK 1) To correctly replace the engine air filter on your Seat Altea, simply follow the steps outlined in this guide. First, ensure your Seat Altea is compl…
How to Replace the Cabin Air Filter on Seat Altea
How to Replace the Cabin Air Filter on Seat Altea
Seat Altea (2004-2015 / MK 1) How to replace the cabin filter on Seat Altea? Here’s how to do it: using a plastic lever, pry out the rivets located on the trim at the bottom of th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos