Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing LPG Injectors from Seat Altea 1.6i

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel injectors

Video tutorial

In this video, you will see instructions on how to remove the LPG injectors from a Seat Altea 1.6i. First, open the bonnet; then disconnect all four electrical connectors of the LPG injection system by releasing the tabs. At this point, you can unscrew the four fixing bolts of the system to remove the cover and pull out the injectors, as shown in the video.

All that remains is to clean them or replace them with new ones, depending on the type of problem; apply the reverse procedure for refitting the injectors!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the LPG Filter on a Seat Altea
How to Replace the LPG Filter on a Seat Altea
Seat Altea (2004-2015 / MK 1) The LPG filter is located in the bottom right corner of the engine compartment. To access it, start by opening the bonnet. Next, unscrew the screws s…
Where are the fuses located in the Seat Altea?
Where are the fuses located in the Seat Altea?
Seat Altea (2004-2015 / MK 1) Any fuse in the Seat Altea is located inside one of the two fuse boxes installed within the vehicle: the first is behind the glove compartment, which…
Where are the fuses located in the Seat Altea?
Where are the fuses located in the Seat Altea?
Seat Altea (2004-2015 / MK 1) Each fuse in the Seat Altea will be positioned inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find two …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos