Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Wind Deflectors on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Body

See other generations:
Video tutorial

Let's see how to install wind deflectors on the windows of a Seat Ibiza: fully lower the front windows and check the fit; clean the seal, and apply a specific product to it, such as Gummy Pledge from LiquyMoli (Amazon code B00CSYM1K8 at £14.70, free delivery in 1 day for Prime customers), to condition the window seals, which will facilitate insertion and help with the seal.

Remove the protective film and start from the rear corner, inserting the end of the deflector into the seal, and continue gently sliding the entire profile of the deflector into the channel until reaching the front corner.

Often, kits also include fixing clips, which should be inserted in the corners for a better grip. Once installed, raise the window and keep it closed for at least 24 hours.


Posted on 14 June 2026 by ScegliAuto


Related tutorials

Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6J, 6P) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…
Where Are the Fuses Located on a Seat Ibiza?
Where Are the Fuses Located on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The specific fuse boxes installed on the Seat Ibiza contain the fuses responsible for the operation of various devices: in this car model, you will f…
Fuse Diagram for the 2002 Seat Ibiza
Fuse Diagram for the 2002 Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The 2002 Seat Ibiza has two fuse boxes. The first is located in the engine compartment next to the battery. The second can be found inside the cabin,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos