Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Clutch on Sherco SE 250-300

Model: Sherco Se R 250
Part: Clutch

Video tutorial

In this video tutorial, learn how to replace the clutch on a Sherco SE 250 and 300 by following these simple instructions. First, remove the old discs by unscrewing the screws of the clutch cover and those of the clutch itself.

Once the old discs are removed, proceed to fit the new ones. At this point, insert the new discs, alternating cork discs and steel discs; it is advisable to soak the cork discs in oil before fitting.

Once inserted, fit the pressure plate and tighten the securing screws, as shown in the video!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Piston of the Sherco SE 250?
How to Replace the Piston of the Sherco SE 250?
Se R 250 To replace the piston of the Sherco SE 300, access the top of the engine to unscrew the bolts that secure the cylinder to its housing. Once the bolts…
How to Replace the Water Pump Bearing on a Sherco SE 250 R?
How to Replace the Water Pump Bearing on a Sherco SE 250 R?
Se R 250 To replace the water pump bearing on the Sherco SE 250 R, loosen the screws securing the cover containing the water pump, located on the right side o…
How to Replace the Piston of the Sherco SE 250
How to Replace the Piston of the Sherco SE 250
Se R 250 To replace the piston of the Sherco SE 250, loosen the bolts securing the cylinder at the top of the engine block. You will also need to disconnect t…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos