Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sherco Se 450

In this video tutorial, you will learn how to remove the stuck oil filter cover on the Sherco SE 450 injection model, as well as on other models of different displacements. First, create a notch on the cover by striking it with a metal tip or using a drill; then tap with something sharp to unscrew and remove the filter cover, as shown in the video. At this point, you can replace the oil filter; then fit the new cover, checking the condition of the thread. Clean the casing thoroughly from dirt.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…
Sherco 300 The steps outlined in this guide will show us how to disassemble and replace the air filter of the Sherco 300 enduro motorcycle engine. First, we put…
Sef 300 In order to replace the oil filter of the Sherco SEF 300, you will need to remove the corresponding cover located on the left side of the motorcycle,…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos