Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Tank and Tap on a Sherco 50cc

Model: Sherco Sm 50
Part:

Video tutorial

To replace the fuel tank and tap on a Sherco 50cc, first lift the seat and then unscrew the bolts securing the fairing. At this point, you can remove the support screws of the tank and disconnect the fuel hoses from the pump.

Now, you will be able to remove both the fuel sensor and the tank itself. The sensor must be pulled out of its housing, as well as the tap. Then, the old parts can be replaced with new ones, which should be reassembled by reversing the previous steps.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Sherco SM 50?
How do you disassemble the engine of the Sherco SM 50?
Sm 50 In order to disassemble the engine of the Sherco SM 50, you need to loosen the screws that fix the engine block to its housing located in the center …
How to Replace the Side Fairing of the Sherco SM 50
How to Replace the Side Fairing of the Sherco SM 50
Sm 50 To replace the side fairing of the Sherco SM 50, loosen the screws that secure it to its housing near the top of the exhaust: these screws are locate…
How to Replace the Chain on the Sherco SM 50?
How to Replace the Chain on the Sherco SM 50?
Sm 50 To replace the chain on the Sherco SM 50, loosen the central nut that secures the sprocket, located on the left side of the bike. Once this nut is lo…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos