Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Sherco SM 50?

Model: Sherco Sm 50
Part: Engine

Video tutorial

In order to disassemble the engine of the Sherco SM 50, you need to loosen the screws that fix the engine block to its housing located in the center of the frame: once the fixing screws of the supports have been loosened, it will be possible to proceed by removing the engine block from its seat and disconnecting the intake and exhaust manifolds.

At this point, it will be possible to proceed by removing the engine block from its seat, removing the cylinder and disconnecting the piston from the connecting rod: in this way, you will have access to all the internal components, so that they can be replaced with new spare parts.


Posted on 21 May 2025 by ScegliAuto


Related tutorials

How to Replace the Fuel Tank and Tap on a Sherco 50cc
How to Replace the Fuel Tank and Tap on a Sherco 50cc
Sm 50 To replace the fuel tank and tap on a Sherco 50cc, first lift the seat and then unscrew the bolts securing the fairing. At this point, you can remove…
How to Replace the Exhaust on a Sherco SM 50
How to Replace the Exhaust on a Sherco SM 50
Sm 50 To replace the exhaust on the Sherco SM 50, unscrew the bolt located at the central rear of the seat to completely remove it from its housing. After …
How to Remove the Original Number Plate Holder on Sherco SM 50
Sm 50 In this video tutorial, follow the main instructions to remove and replace the original number plate holder on a Sherco SM 50 motorcycle. First, remo…

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos