Do it yourself
| ||||
|
Model: Sherco Sef 300
The operation of replacing the engine oil of the Sherco SEF 300 involves accessing the central lower part of the motorcycle, where the oil tank drain plug is located. The plug can be removed using a specific key, and all the used oil must be collected in a properly positioned container. Once the oil has completely drained, the screws securing the left side of the engine casing can be loosened to remove the oil filter located under the casing. Once replaced, the casing and drain plug can be closed, and the new oil can be poured through the refill hole located on the right side of the vehicle.
Posted on 12 February 2024 by ScegliAuto
|
How do you change the engine oil of the Aprilia Storm 125?In order to replace the Aprilia Storm 125 engine oil, you need to loosen the oil tank drain plug located in the lower central part of the bike: after this cap has been unscrewed, it will be possible to go and collect the oil. exhausted inside a suitably positioned container. When all the oil has flowed out, it will be possible to close the drain plug and top up: this must be done by inserting a funnel in the hole in the crankcase which is located on the right side of the bike, immediately above the muffler. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |