Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel tank cap of the 2015 Skoda Fabia

Model: Skoda Fabia Mark3, NJ - Years 2014-2021
Part: Fuel cap

Opening and closing the fuel cap of the 2015 Skoda Fabia is a simple and quick operation to be carried out whenever necessary. Before proceeding with the opening of the cap, we must open the fuel door, and to do this, we just need to press on the side of it. After opening the fuel door, we unscrew the cap counterclockwise. To close the cap once refueling is done, we need to turn it clockwise. Then we can close the fuel door by pressing on the side again. If the cap is stuck, you can pour some oil on it and wait a few minutes before trying to open the cap again.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter on the Škoda Fabia?
How to replace the fuel filter on the Škoda Fabia?
Skoda Fabia (1999-2007 / 6Y, Mark1) To replace the diesel filter on the Škoda Fabia, open the bonnet and locate the part, which is found at the front of the engine bay, near the right f…
How to Check the Tyre Pressure on the Skoda Fabia 3
How to Check the Tyre Pressure on the Skoda Fabia 3
Skoda Fabia (2014-2021 / Mark3, NJ) Reset the tyre pressure warning light on a Skoda Fabia 3 after checking the tyre pressures. To find the correct tyre pressure, open the fuel filler c…
How to Replace the Oil Filter on the Škoda Fabia?
How to Replace the Oil Filter on the Škoda Fabia?
Skoda Fabia (1999-2007 / 6Y, Mark1) To replace the oil filter on the Škoda Fabia, you need to lift the car to access its underside: here, you will need to loosen the bolts securing the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos