Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel cap of the Škoda Citigo?

Model: Skoda Citigo MK 1 - Years 2011-2020
Part: Fuel cap

In order to replace the fuel door of the Škoda Citigo, you need to open the door itself, so that you can locate the fixing screw located to the left of the cap: once this screw has been loosened, it will be possible to remove the inner cover of the cap and the door itself from its housing. Once these components have both been removed, it will be possible to insert the new ones in their place, so that they are fixed with the corresponding screw; after installation, it will be necessary to check that the piece functions correctly.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Fuel Cap on a Škoda Citigo
How to Open the Fuel Cap on a Škoda Citigo
Skoda Citigo (2011-2020 / MK 1) To open the fuel cap on a Škoda Citigo, apply a small pressure on the side of the flap so that it opens, granting access to the cap underneath. The c…
How to Reset the Trip Meter in a Skoda Citigo?
How to Reset the Trip Meter in a Skoda Citigo?
Skoda Citigo (2011-2020 / MK 1) In this tutorial, you will learn how to reset the trip meter in a Skoda Citigo, a very simple and quick operation. This trip meter can be very useful…
How to reset the service light on the Skoda Citigo
How to reset the service light on the Skoda Citigo
Skoda Citigo (2011-2020 / MK 1) If the service light on the instrument panel of your Skoda Citigo continues to stay on constantly, then it is time to discover together how to perfor…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos