Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the oil change and oil filter replacement on the Skoda Fabia.

Model: Skoda Fabia Mark3, NJ - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:
Video tutorial

The following video tutorial shows us the steps to replace the engine oil and oil filter on a Skoda Fabia model 3 vehicle independently. To perform this operation, we need to open the front hood and unscrew the tank cap. Then we will lift the vehicle on stands and remove the oil tank nut. Unscrew the screws on the cover panel.

After removing the oil tank nut, let the used oil drain into a container. Then remove the oil filter box. Insert the new filter and tighten the oil tank nut with a torque of 30 Nm. Lower the vehicle after removing the stands and pour 5 liters of oil into the tank.


Posted on 19 November 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter on a Skoda Fabia
How to Change the Engine Oil and Filter on a Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) To replace the engine oil and filter on a Skoda Fabia, it is advisable to bring the engine to operating temperature, then turn it off and safely lift…
How to Change the Engine Oil and Filter on a Skoda Fabia
How to Change the Engine Oil and Filter on a Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) To replace the engine oil and filter on a third-generation Skoda Fabia, slightly warm the engine and then turn it off. Position the vehicle on a flat…
How to Change the Engine Oil in a Skoda Fabia 2
How to Change the Engine Oil in a Skoda Fabia 2
Skoda Fabia (2007-2014 / 5J, Mark2) Before starting the engine oil change in a Skoda Fabia 2, it is advisable to use a pre-change cleaner, adding it after the car has been running for a…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos