How to Change the Engine Oil and Filter on a Skoda Fabia

Model: Skoda Fabia - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:

Video tutorial

To replace the engine oil and filter on a third-generation Skoda Fabia, slightly warm the engine and then turn it off. Position the vehicle on a flat surface and lift it safely, removing any undertray if necessary. After placing a container under the oil sump, unscrew the drain plug and allow the used lubricant to drain completely.

Next, remove the oil filter, which varies in position depending on the engine, and install the new element with the appropriate seals. Then, replace the drain plug with the required seal and add new oil, following the specifications and quantity indicated by the manufacturer.

Finally, briefly start the engine, check for leaks, and verify the oil level, adjusting if necessary.

Posted on 21 October 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

How to Open the Bonnet of the Toyota C-HR?

In this tutorial, you will learn how to open the bonnet of the Toyota C-HR, a very simple operation that follows the typical procedure for most vehicles. First, unlock the catches using the remote button, then open the driver's door, locate the lever in the lower left area of the dashboard, and pull it. Next, move to the front of the vehicle, locate the second lever, push it to the left, and simultaneously lift the bonnet. To close it, simply let it drop gently.

Watch the video!

by ScegliAuto

How to Change the Engine Oil and Filter on a Skoda Fabia

Related tutorials

Other guides you may be interested in

How to Open the Bonnet of the Toyota C-HR?

More videos