|
Do it yourself
| |||
| ||||
How to change the engine oil and oil filter on a Skoda Fabia III petrol.
Model: Skoda Fabia
Mark3, NJ
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
Let's see how to change the oil and filter on a Skoda Fabia III petrol: we start by opening the hood and unscrewing the oil cap. We lift the front of the vehicle and unscrew the oil drain plug; in the meantime, we will have placed a large container underneath to collect the used oil (we will dispose of it along with the filter at an authorized center). The filter is located at the top, on the side of the engine; let's unscrew it, making sure that the gasket comes off with the filter as well. We clean the mounting surface on the engine block thoroughly, prepare the new filter by lubricating the new gasket with clean oil, and screw the filter on by hand. We go under the vehicle and install a new plug and a new gasket, lower the car, and fill it with about 90% of the oil capacity. We start the engine and let it run for a couple of minutes at idle. Then we wait a few minutes to allow the oil to drain and measure the oil level, adding more oil until we reach the maximum level on the dipstick.
Posted on 11 December 2025 by ScegliAuto
Related tutorials
Skoda Fabia
(2007-2014 /
5J, Mark2)
In this video, we can see how to change the air filter of a Skoda Fabia 2 gasoline: we open the hood, the air filter box is a black plastic container…
Skoda Fabia
(2007-2014 /
5J, Mark2)
To replace the engine oil and filter on a Skoda Fabia, it is advisable to bring the engine to operating temperature, then turn it off and safely lift…
Skoda Fabia
(2014-2021 /
Mark3, NJ)
To replace the engine oil and filter on a third-generation Skoda Fabia, slightly warm the engine and then turn it off. Position the vehicle on a flat…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |