Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear headlight of a Skoda Superb?

Model: Skoda Superb 3V, B8 - Years 2015-2023
Part: Tail light

To replace the rear light of a Skoda Superb, open the trunk and remove the side panel to access the rear part of the light assembly. Locate the screws holding the light and unscrew them using a suitable screwdriver. Once loosened, carefully remove the light, being careful not to damage the cables. Disconnect the electrical connector by pressing the release tab. Take the new light, connect it to the connector and reattach it to the frame by tightening the screws. Finally, put the side panel back in place and check that the light is working properly by turning on the rear lights.

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Skoda Superb (2015-2023 / 3V, B8) To remove the rear light of a Skoda Superb, start by opening the trunk. Locate the fixing screws of the light inside the trunk, usually covered by an…
Skoda Superb (2015-2023 / 3V, B8) In the following guide, you will find the description of all the steps you need to take if you intend to replace the front headlamp bulb of your Skod…
Skoda Superb (2001-2008 / B5, 3U) To easily find the fuse box of your Skoda Superb, simply follow the steps described in the following guide. First, ensure that the car is parked safe…

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos