Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Skoda Kamiq key remote?

Model: Skoda Kamiq MK 1 - Years 2018-2026
Part: Key

Following the instructions in this guide, you will see how to disassemble and replace the battery in the Skoda Kamiq key remote. First, take your remote and start prying at the seam of the rear cover to remove it; inside, you will find the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and with the same code; insert it the right way round and reassemble the remote, checking the correct functioning of the controls.

Posted on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of the Skoda Kamiq remote control
Replacement of the battery of the Skoda Kamiq remote control
Skoda Kamiq (2018-2026 / MK 1) These simple steps will show us how to replace the battery of the key remote for the Skoda Kamiq. First, take the remote in hand and start removing t…
Replacement of the battery of a Skoda Kamiq remote control
Replacement of the battery of a Skoda Kamiq remote control
Skoda Kamiq (2018-2026 / MK 1) Today, thanks to this very short video guide, you will be able to see all the steps necessary to replace the battery of your Skoda Kamiq remote contr…
How to Replace the Key Battery of the Skoda Kamiq
How to Replace the Key Battery of the Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) To correctly replace the small battery located inside the key of your Skoda Kamiq Mk1, it only takes a few seconds. With the following guide, you wil…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos