Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the remote battery of a Skoda Kamiq

Model: Skoda Kamiq MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

Today, with this brief video guide, you will see all the steps necessary to replace the remote battery of your Skoda Kamiq, first series model. First, press the physical key release button, then pry off the back cover of the remote as shown in the video.

You will then see the old battery that needs replacing. Using a small flathead screwdriver, remove the exhausted battery and insert a new one before closing it all up. The required battery is a CR2032.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Replacing the Remote Battery of the Skoda Kamiq
Replacing the Remote Battery of the Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) These simple steps will show you how to replace the battery in the Skoda Kamiq key remote. First, take your remote and start by removing the plastic …
How to replace the battery in the Skoda Kamiq key remote?
How to replace the battery in the Skoda Kamiq key remote?
Skoda Kamiq (2018-2026 / MK 1) Following the instructions in this guide, you will see how to disassemble and replace the battery in the Skoda Kamiq key remote. First, take your rem…
How to Replace the Key Battery in a Škoda Kamiq?
How to Replace the Key Battery in a Škoda Kamiq?
Skoda Kamiq (2018-2026 / MK 1) To replace the key battery in a Škoda Kamiq, press the button on the top of the device to lever it out of its housing. This will allow you to detach …

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos